Skip to main content
Albion Ecotech

X-Flocs: Advance Membrane Bioreactor System (MBR)

Albion system brand

Albion system brand offers a combined biological and membrane system that produces high-quality, reuse-ready treated water in a compact footprint.

Visit official website

Brand story

What X-Flocs Is

X-Flocs is Albion Ecotech’s membrane bioreactor (MBR) system. It treats wastewater with biological treatment and membrane filtration in the same reactor. Bacteria break down the organic matter, and a membrane then holds back the bacteria and suspended solids. Only clean, low-organic permeate passes through, and it can be reused or discharged after chlorine dosing.

How the Process Works

  1. Pre-screening. Raw wastewater first passes through a pre-filter screen that removes debris and plastics before the reactor.
  2. Biological treatment. Inside the reactor, bacteria break down the organic pollutants. An integrated air diffuser supports their activity.
  3. Membrane filtration. A suction pump draws the water through the membrane. The membrane’s drawing rate also controls how long the wastewater stays in the reactor.
  4. Disinfection. The permeate is dosed with chlorine before reuse or discharge.

Because the membrane is an absolute barrier for bacteria and suspended solids, the plant does not need a separate clarification stage. Biological treatment and separation happen in one compact unit.

Membrane Options

X-Flocs is offered with flatsheet PTFE, hollow fibre and tubular membranes, with a pore size of 0.03 to 0.2 micron. Sumitomo Electric, one of Albion’s technology partners, supplies POREFLON PTFE hollow fibre MBR membranes for X-Flocs.

Where X-Flocs Is Used

  • Sewage treatment: strong organic load removal and pathogen-free water for discharge or reuse
  • Industrial effluent treatment: high-strength streams with consistent compliance
  • Compact sewage treatment plants: modular units for sites with limited space
  • Food industries: fats, proteins and organic contaminants in processing wastewater
  • Drinking water treatment plants: filtration and turbidity removal

Why Choose X-Flocs

  • Stable effluent quality. The membrane keeps treated water quality steady even when the strength of the incoming wastewater changes.
  • Smaller footprint. Without a secondary clarifier, the plant needs less space than a conventional line.
  • Better removal. COD/BOD and nutrient removal are higher than in ASP, MBBR or FAB systems.
  • Less sludge. X-Flocs produces less sludge than conventional biological processes.
  • Easy to scale. Capacity can be increased by adding membrane modules.

Upgrading an Existing Plant

For plants running ASP, MBBR or FAB systems that need better effluent quality, a smaller footprint or more capacity, X-Flocs can be introduced without a full plant rebuild. The performance gain is added to the existing setup instead of replacing it.

Working With Other Albion Systems

  • A-Pro DAF can remove oil, grease and solids ahead of the biological stage when the wastewater carries a heavy load of them.
  • M-Flocs AMBBR is the alternative when the goal is more biological capacity inside an existing basin.
  • U-Flocs ultrafiltration can polish the effluent or condition it as feed for reverse osmosis.
  • C-Flocs ceramic MBR is the option for feeds that are too hot, aggressive or oily for a polymeric membrane.

To check whether X-Flocs suits your plant, send your influent data and discharge or reuse targets to Albion Ecotech’s technical team.

Discuss your project

Tell us about your treatment goals, project conditions, or partnership needs, and our team will help you identify the right next step.

Start a project enquiry